Fiber proof testers are created to apply a set load to a fusion-spliced optical fiber in order to test the effectiveness of the spliced fiber. Our fiber proof testers can be purchased in both linear and rotary designs, for both proof and tension testing. Fiber evidence testers are available for single mode, multimode, and polarization-maintaining fibers. Select from dedicated, stand alone techniques or multi-purpose designs that are also capable of stripping, cleaning, cleaving, splicing, and/or recoating.

Fiber Recoaters with Proof Testers provide easy, integrated answers to recoat and optical fiber ribbon machine. The fiber recoating procedure restores the buffer coating to a stripped fiber, offering much more flexibility than a heat-shrink safety sleeve, allowing it to be handled and coiled with no damage to the fusion-spliced section. The incorporated linear or rotary proof tester allows customers to right away check a recoated fiber having a pre-decided load and figure out the long-term reliability of the fiber. Because of the capacity to recover a combination-spliced fiber to near initial problem, these systems are perfect for applications like undersea optical fiber wires, submarine communication cabling, fiber lasers, or Dispersed Bragg Reflector (DBR) lasers.

This process begins with the fusion-spliced section of fiber becoming placed in the middle of the mold assembly (see picture for the right). As soon as set in place, inserts inside the fiber blocks safe the spliced fiber set up. Recoat materials is motivated to the cavity and after that UV-treated. The recoated fiber can then be analyzed by pulling on it as much as a pre-determined load.

Recoater and Mold Assembly Options – Recoaters can be found with either a computerized or handbook mold set up. The automated mold set up functions pneumatic control of the mold plates and it is enhanced for top-volume manufacturing applications. Handbook mold assemblies, around the other hand, use easy-to-open mold plates that offer much more flexibility and are ideal for reduced-volume manufacturing or RAndD applications. An automated or manual volumetric dispensing pump and shot system is utilized to inject the recoat materials into the mold cavity.

The PTR208 automatic recoater comes standard using a mold set up for tape former; For our handbook recoaters (Product #s PTR206, PTR206B, PTR307, and PTR307B), the mold set up comes separately in order that customers can select the right mold covering size for their application. Custom mold coating sizes are available up to . Pre-installation of the mold set up at the manufacturer is also readily available. Contact Technology Support for more information on custom molds or manufacturer assembly.

We provide each high-index (Product # AB950200) and low-index (Item # PC373) recoat materials for use during these recoaters. Recoaters with handbook injection pumps (Product #s PTR206B and PTR307B) are suitable for both varieties of recoat materials; all the other recoaters are appropriate for the high-index materials only. Our handbook recoaters having an automated shot system (Product #s PTR206 and PTR307) can be customized to work with both the low- and-index recoat material; please get in touch with Technology Support to learn more.

Evidence Tester Options – The PTR206, PTR206B, and PTR208 Fiber Recoaters come with an integrated linear proof tester, which takes the TCC laser printer for cable to some predetermined load (20 N) then produces it. The linear proof tester utilizes the identical fiber holding obstructs since the recoater and so the fiber does not need to be moved just before testing. The PTR307 and PTR307B Fiber Recoaters include an incorporated rotary proof tester, which can carry out both proof and tension tests (89 N). One set of evidence check grips is included; substitute proof test bpabim are available below in packages of 10. Each testing procedure is completely programmable via the provided handset or tablet pc control, enabling the consumer to select guidelines like the load, the speed where the load is applied, as well as the hold time.

Inserts for Fiber Holding Obstructs – Along with the above, we provide many different inserts to be used in the fiber holding obstructs from the recoaters in order to back up a wide range of fiber covering diameters. For recoaters having a rotary proof tester, the inserts are suitable for fiber covering diameters in a range from 125 to 900. For recoaters with a linear proof tester, the inserts cover a range for fiber films?.

SZ Stranding Line – Unique Info On This Issue..

We are using cookies on our website

Please confirm, if you accept our tracking cookies. You can also decline the tracking, so you can continue to visit our website without any data sent to third party services.