Much has been written regarding the compatibility of numerous brands and types of slot cars working other brands and kinds of monitors. It is relatively well known, for example, that almost any analog slot car can work well on a Carrera analog track simply because Carrera has the largest and deepest slot of some of the major producers. Alternatively, many Carrera cars will not work well, or at all, on many other brands of track because the manual is just too broad or deep to suit in some thing like a Scalextric track. While articles have been composed about the vehicles compatibility, little continues to be composed about track retaining walls or obstacles. This study can look thorough at tracks, retaining wall surfaces, and obstacles from Carrera, Ninco, and Scalextric, and in addition show how well they do, or don’t, work when mixing brands.
Firstly, let’s begin with Scalextric track and obstacles, because they are very probably by far the most commonly used make of commercial produced slot car systems. Scalextric will make a excellent looking barrier, manufactured from a smooth, pliable plastic that keeps its type well, and can absorb impacts of port vehicle crashes without having physical damage. These obstacles can connect to Scalextric Sports activity track in several ways- with little black clips that attach directly to the bottom of the track, or inserted into lines and stations specifically for these barriers in the item shoulder pieces. Whilst the obstacles do fit well and fairly stiffly in to the black clips, the clips do not remain connected strongly to the monitor without using adhesives or any other methods of affixing them within a much more permanent style to the Track Fans TV!. Also having a serious impact, either the barrier, or occasionally the complete shoulder area may dislodge from your track. Visually the barriers are extremely pleasing, plus they do small injury to the vehicles while slowing or stopping them. However, they often must be place back into position right after occurrences.
Carrera at the same time supplied two several types of barriers- a single was a smooth, pliable rubberized that would slide into clips and attach towards the monitor, and was available in dark or red. They are will no longer produced. The current Carrera barrier system consists of a red and white-colored striped “candy cane” bit of 3mil PVC that glides into firmly fitted vinyl clips that affix to the base of the track. The red-colored and white-colored striping matches the design found on the border and shoulder joint pieces of Carrera monitor, and does look appropriate on razor-sharp turns, though a lot less so on straight sections where a barrier may be warranted, like a link. Also, the PVC tends to turn out to be brittle as time passes, and definately will crack and break with successive impacts. Additionally, it has very little pliability, and definately will pick up paint away from wayward cars. This has a tendency to give a realistic look to the buffer, however the cars will show warning signs of put on. This system does stay strongly affixed for the monitor even with serious impacts. The strips of Pvc material can also be easily reduce to custom measures, then one item can be as long as 4 feet, allowing for a continuous look and feel over a long turn. It is also quite simple to generate your personal custom barrier walls by printing right to sheets of PVC and reducing it into strips of the proper height. This can allow for the development of practical and fairly durable trackside marketing.
Although much less prevalent as Carrera and Scalextric, Ninco makes exceptional monitor and buffer products that are nearly universally acknowledged as the very best quality mass manufactured techniques. The track has almost the same size and level because the Carrera, while obtaining the versatility and aesthetics in the Scalextric. The obstacles consist of reduced wall surfaces, rock looking walls, and even a wall structure having a higher fencing. The Ninco barriers are of the comparable material for the Scalextric types, and soak up effect without “buying and selling paint”
Now, assume you may have a single brand of track, however, you would like to make use of another brand for a wall or buffer. Fortunately, this is not nearly as complicated or challenging a compatibility problem because it is using the vehicles. The height in the Carrera PVC pieces is exactly like the elevation in between the top and bottom side rails of the Scalextric buffer railings, which is quite simple to eliminate the Carrera chocolate-cane strips and replace them with Scalextric guardrails. The Carrera fastening system towards the Carrera monitor is very secure, and also the railings remain in location as well or much better using the Carrera clips on Carrera track as they do utilizing Scalextric clips on Scalextric track. Lengths may become a minor problem, but the material trims easily with a utility knife. Unfortunately, in order to utilize the Carrera “chocolate cane” around the Scalextric monitor, the best way to do it well is to use an adhesive, laying the Carrera pieces over the Scalextric shield side rails. Hot glue works well for this, and can be eliminated relatively easily as well.
The Ninco barriers and wall surfaces really are a a single piece system, with all the clips being an element of the wall structure or barrier section. These affix with ease not only to the Ninco monitor, but the Carrera and Scalextric. Actually, the Ninco items oyalkf to install even more tightly using the Scalextric track than on the native monitor. On the Carrera track, the height in the monitor is just somewhat higher than the space involving the top and bottom in the Ninco clips. However, it can be produced to match by cutting the advantage from the Carrera monitor really slightly, nearly unnoticeably along the base. Once again, the Carrera candy cane can be attached to the Ninco barriers through the use of adhesives.